Assembly Instructions for 10 X 10 Gazebo Replacement Canopy
10 X 10 Gazebo Replacement Canopy – Awnings for tents can be used for a variety of different things, such as shielding an outdoor party from rain or sun, as well as providing a protected outdoor workspace. The assembly of the pavilion shop is quite simple, but it can be difficult at times, and a person might have trouble lifting the pavilion store in its place on its own.
Place the straight tube and corner to complete the top processing. end corner pieces will have one side without an opening, and intermediate corner pieces will have an opening on both sides. Mount the roof. Once you have the pipes properly arranged, connect them so that the roof rises on the ground. Place the roof tarpaulin on the mounted roof frame and auxiliary shock absorber below using the fastening cables supplied by the manufacturers.
12 Photos Gallery of: Assembly Instructions for 10 X 10 Gazebo Replacement Canopy
Lift the tent. Raise the tent by inserting leg tubes on one side. This will contribute to the tent evenly when you are going to insert the tubes on the other side. Insert the leg posts on the opposite side. This is where having an extra person comes in handy. One person should raise the side and support it while the other person inserts the leg posts. Make sure everything is secure and attach the walls if necessary. Most tents awnings will come with walls to protect from sunlight and additional winds. These are not necessary to support the store, but they are there if you need them.